SMART FACTORY
AUTOMOTIVE INDUSTRY
2004-1301 Cầu đấu dây 3-conductor through terminal block
Item no. 2004-1301
3-conductor through terminal block
3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; gray
Liên hệ:
3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; gray
Item no. 2004-1301
3-conductor through terminal block
Electrical data
Ratings per IEC/EN
Ratings per
IEC/EN 60947-7-1
Overvoltage category
III
III
II
Pollution degree
3
2
2
Nominal voltage
800 V
–
–
Rated surge voltage
8 kV
–
–
Rated current
32 A
–
–
Current at conductor cross-section (max.) mm²
41 A
–
–
Ratings per UL
Approvals per
UL 1059
Use group
B
C
D
Rated voltage
600 V
600 V
–
Rated current
30 A
30 A
–
Ratings per CSA
Approvals per
CSA 22.2 No 158
Use group
B
C
D
Rated voltage
600 V
600 V
–
Rated current
30 A
30 A
–
Ex information
| Reference hazardous areas | See application instructions in section “Knowledge and Downloads – Documentation – Additional Information: Technical Section; Technical Explications” |
| Ratings per | ATEX: PTB 05 ATEX 1095 U / IECEx: PTB 05.0033U (Ex eb IIC Gb) |
| Rated voltage EN (Ex e II) | 550V |
| Rated current (Ex e II) | 30A |
Power Loss
| Power loss, per pole (potential) | 1.024W |
| Rated current IN for specified power loss | 32A |
| Resistance value for specified, current-dependent power loss | 0.001Ω |
Connection data
| Clamping units | 3 |
| Total number of potentials | 1 |
| Number of levels | 1 |
| Number of jumper slots | 2 |
Connection 1
2004-1301
| Connection technology | Push-in CAGE CLAMP® |
| Actuation type | Operating tool |
| Connectable conductor materials | Copper |
| Nominal cross-section | 4 mm² |
| Solid conductor | 0.5 … 6 mm² / 20 … 10 AWG |
| Solid conductor; push-in termination | 1.5 … 6 mm² / 14 … 10 AWG |
| Fine-stranded conductor | 0.5 … 6 mm² / 20 … 10 AWG |
| Fine-stranded conductor; with insulated ferrule | 0.5 … 4 mm² / 20 … 12 AWG |
| Fine-stranded conductor; with ferrule; push-in termination | 1.5 … 4 mm² / 18 … 12 AWG |
| Note (conductor cross-section) | Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. |
| Strip length | 11 … 13 mm / 0.43 … 0.51 inches |
| Wiring direction | Front-entry wiring |
Physical data
2004-1301
| Width | 6.2 mm / 0.244 inches |
| Height | 65.5 mm / 2.579 inches |
| Depth from upper-edge of DIN-rail | 32.9 mm / 1.295 inches |
| Depth | 39.5 mm / 1.555 inches |
Mechanical data
2004-1301
| Mounting type | DIN-35 rail |
| Marking level | Center/side marking |
Material data
| Note (material data) | Information on material specifications can be found here |
| Color | gray |
| Material group | I |
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.15MJ |
| Weight | 8.7g |
Sản phẩm tương tự
Rail-Mount Terminal Blocks
Rail-Mount Terminal Blocks
Item no. 2202-1301/000-001 3-conductor through terminal block
Rail-Mount Terminal Blocks
Rail-Mount Terminal Blocks
Rail-Mount Terminal Blocks
