SMART FACTORY
AUTOMOTIVE INDUSTRY
2002-1301 | WAGO | Cầu Đấu Dây 2002-1301 | 3-conductor through terminal block 2002-1301
Liên hệ:
Electrical data
Ratings per IEC/EN
Ratings per
IEC/EN 60947-7-1
Overvoltage category
III
III
II
Pollution degree
3
2
2
Nominal voltage
800 V
–
–
Rated surge voltage
8 kV
–
–
Rated current
24 A
–
–
Current at conductor cross-section (max.) mm²
32 A
–
–
Ratings per UL
Approvals per
UL 1059
Use group
B
C
D
Rated voltage
600 V
600 V
–
Rated current
20 A
20 A
–
Ratings per CSA
Approvals per
CSA 22.2 No 158
Use group
B
C
D
Rated voltage
600 V
600 V
–
Rated current
20 A
20 A
–
Ex information
| Reference hazardous areas | See application instructions in section “Knowledge and Downloads – Documentation – Additional Information: Technical Section; Technical Explications” |
| Ratings per | ATEX: PTB 03 ATEX 1162 U / IECEx: PTB 03.0004U (Ex eb IIC Gb) |
| Rated voltage EN (Ex e II) | 550V |
| Rated current (Ex e II) | 22A |
| Rated current (Ex e II) with jumper | 20A |
Power Loss
| Power loss, per pole (potential) | 0.766W |
| Rated current IN for specified power loss | 24A |
| Resistance value for specified, current-dependent power loss | 0.001Ω |
Connection data
| Connection points | 3 |
| Total number of potentials | 1 |
| Number of levels | 1 |
| Number of jumper slots | 2 |
Connection 1
| Connection technology | Push-in CAGE CLAMP® |
| Actuation type | Operating tool |
| Connectable conductor materials | Copper |
| Nominal cross-section | 2.5 mm² |
| Solid conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Solid conductor; push-in termination | 0.75 … 4 mm² / 18 … 12 AWG |
| Fine-stranded conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Fine-stranded conductor; with insulated ferrule | 0.25 … 2.5 mm² / 22 … 14 AWG |
| Fine-stranded conductor; with ferrule; push-in termination | 1 … 2.5 mm² / 18 … 14 AWG |
| Note (conductor cross-section) | Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. |
| Strip length | 10 … 12 mm / 0.39 … 0.47 inches |
| Wiring direction | Front-entry wiring |
Physical data
| Width | 5.2 mm / 0.205 inches |
| Height | 59.2 mm / 2.33 inches |
| Depth from upper-edge of DIN-rail | 32.9 mm / 1.295 inches |
Mechanical data
2002-1301
| Mounting type | DIN-35 rail |
| Marking level | Center/side marking |
Material data
2002-1301
| Color | gray |
| Material group | I |
| Insulation material | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.147MJ |
| Weight | 6.1g |
Sản phẩm tương tự
Rail-Mount Terminal Blocks
Rail-Mount Terminal Blocks
Rail-Mount Terminal Blocks
Rail-Mount Terminal Blocks
Rail-Mount Terminal Blocks
